CSFP Optical Transceiver

Products

Quick Download

Home > Products > Compact SFP (CSFP) > CSFP

The Forara CSFP is a dual-channel Bi-Direction SFP module, integrates two Bi-Direction interfaces in one SFP module with same mechanical dimensions as the standard SFP transceiver but double the port density of current equipment or line card.
The CSFP is 1310nm FP or 1490nm DFB laser diode transmitter and 1490nm or 1310nm PIN photodiode detector with preamplifier, operating transmission range up to 20km over two single strands of standard SMF, and IEEE802.3ah 100BASE-BX, OC-3 / STM-1 SONET / SDH, 1000BASE-BX, OC-48 / STM-16 SONET / SDH compliance.

Part Number	Description
FCS3403L1	155M CSFP Tx1310/Rx1490nm 10km LC DDM SMF
FCS4303L1	155M CSFP Tx1490/Rx1310nm 10km LC DDM SMF
FCS3503L1	155M CSFP Tx1310/Rx1550nm 10km LC DDM SMF
FCS5303L1	155M CSFP Tx1550/Rx1310nm 10km LC DDM SMF
FCS3403L2	155M CSFP Tx1310/Rx1490nm 20km LC DDM SMF
FCS4303L2	155M CSFP Tx1490/Rx1310nm 20km LC DDM SMF
FCS3503L2	155M CSFP Tx1310/Rx1550nm 20km LC DDM SMF
FCS5303L2	155M CSFP Tx1550/Rx1310nm 20km LC DDM SMF
FCS3424L1	1.25G CSFP Tx1310/Rx1490nm 10km LC DDM SMF
FCS4324L1	1.25G CSFP Tx1490/Rx1310nm 10km LC DDM SMF
FCS3524L1	1.25G CSFP Tx1310/Rx1550nm 10km LC DDM SMF
FCS5324L1	1.25G CSFP Tx1550/Rx1310nm 10km LC DDM SMF
FCS3424L2	1.25G CSFP Tx1310/Rx1490nm 20km LC DDM SMF
FCS4324L2	1.25G CSFP Tx1490/Rx1310nm 20km LC DDM SMF
FCS3524L2	1.25G CSFP Tx1310/Rx1550nm 20km LC DDM SMF
FCS5324L2	1.25G CSFP Tx1550/Rx1310nm 20km LC DDM SMF
FCS3448L1	2.5G CSFP Tx1310/Rx1490nm 10km LC DDM SMF
FCS4348L1	2.5G CSFP Tx1490/Rx1310nm 10km LC DDM SMF
FCS3548L1	2.5G CSFP Tx1310/Rx1550nm 10km LC DDM SMF
FCS5348L1	2.5G CSFP Tx1550/Rx1310nm 10km LC DDM SMF
FCS3448L2	2.5G CSFP Tx1310/Rx1490nm 20km LC DDM SMF
FCS4348L2	2.5G CSFP Tx1490/Rx1310nm 20km LC DDM SMF
FCS3548L2	2.5G CSFP Tx1310/Rx1550nm 20km LC DDM SMF
FCS5348L2	2.5G CSFP Tx1550/Rx1310nm 20km LC DDM SMF

Notes:
1. Standard LC/PC connector.
2. Only connections with patch cords with PC or UPC connectors are supported. Patch cords with APC connectors are not supported.
3. Minimum cabling distance is 2m according to the IEEE 802.3 standard.

Page 1/1 1